PVC-U pipe for water supply

Product introduce

PVC-U water supply pipe,as a developed and mature water supply pipe,has the advantages of acid

resistance,alkali resistance,corrosion resistance,pressure resistance,high strength,light weight,low price,low fluid resistance,no secondary pollution,sanitary requirements,convenient construction and operation.The pvc-u environmental protection water pipe produced by our factory can replace the traditional water supply pipe and

prevent secondary pollution,so that people can drink clean and healthy water.PVC-U pipe after strict testing shows that the product meets the requirements of various health standards,is a truly healthy,environmental protection of new products.

Product Feature:

1.Light weight,convenient handling,loading and unloading

Pvc-u pipe material is very light,the proportion is only 1/5 of the iron pipe,handling,loading and unloading, construction is convenient,can save construction costs.

2.Corrosion resistance,excellent drug properties

Pvc-u pipe has excellent acid,alkali and corrosion resistance,especially suitable for chemical industry, wastewater drainage,sanitary sewer and other aspects.

3.Low fluid resistance

The wall surface of pvc-u pipe is smooth,with litle resistance to fluid,and its roughness coefficient is only 0.009,lower than that of other pipes.In the case of the same diameter,the flow rate is large and there is no scale attached.

4.High mechanical strength

Pvc-u pipe has high water pressure resistance,external pressure resistance and impact resistance,which is suitable for supporting projects under various conditions.

5.Good electrical insulation

Pvc-u pipe has excellent electrical insulation performance,suitable for wire,cable protection sleeve,can be widely used in telecommunications,power and construction of the wire piping.

6.Does not affect water quality

Pvc-u pipe and fittings dissolution test results confirmed that it does not affect the water quality,for the current tap water supporting the best pipe.

7.Good water tightness

The combination of pvc-u pipe has a good water tightness,no matter whether it adopts loop socket or TS joint at the socket.

8.Easy construction

Pvc-u pipe construction is fast and convenient,and the construction cost is low.

Product Application:

Tap water engineering,electrical engineering,construction engineering,sewer engineering,electric wire engineering,drilling engineering,brine engineering,natural gas engineering,chemical factory,paper

factory,electroplating factory,agricultural field mine aquaculture industry,highway engineering,golf course engineering,fishery use plastic raft brewing fermentation factory etc

Specification:

Nominal Diameter (mm)	Wall Thickness(mm)
	SDR26	SDR21	SDR17	SDR13.6	SDR11	SDR9
	PN6	PN8	PN10	PN12.5	PN16	PN20
20	一	一		一	–	2
25	一	一	一	一	2	2.3
32	–	–	–	2	2.4	2.9
40	一	一	2	2.4	3	3.7
50	一	2	2.4	3	3	4.6
63	2	2.5	3	3.8	4.7	5.8
75	2.3	2.9	3.6	4.5	5.6	6.9
90	2.8	3.5	4.3	5.4	6.7	8.2
110	2.7	3.4	4.2	5.3	6.6	8.1
125	3.1	3.9	4.8	6	7.4	9.2
140	3.5	4.3	5.4	6.7	8.3	10.3
160	4	4.9	6.2	7.7	9.5	11.8
180	4.4	5.5	6.9	8.6	10.7	13.3
200	4.9	6.2	7.7	9.6	11.9	14.7
225	5.5	6.9	8.6	10.8	13.4	16.6
250	6.2	7.7	9.6	11.9	14.8	18.4
280	6.9	8.6	10.7	13.4	16.6	20.6
315	7.7	9.7	12.1	15	18.7	23.2
355	8.7	10.9	13.6	16.9	21.1	26.1
400	9.8	12.3	15.3	19.1	23.7	29.4
450	11	13.8	17.2	21.5	26.7	33.1
500	12.3	15.3	19.1	23.9	29.7	36.8
560	13.7	17.2	21.4	26.7	一	一
630	15.4	19.3	24.1	30	一

No.	item	performance requirements
1	standard	GB/T10002.1-2006
2	appearance	the internal and external surfaces of the pipe shallbe smooth and free from obvious scratches,dents,visible impurities and other surface defects affecting the requirements of this section.The end face of the pipe shall be cut flat and perpendicular to the axis.
3	specification(OD,EN)	conform tolerance requirements
4	density	1350～1460
5	vicat softening temperatureicat softening temperature	≥80°C
6	longitudinal shrinkage rate %	≤5%
7	dichloromethane impregnation	surface change is not less than 4N
8	drop hammer impact test TIR	≤5%
9	hydraulic test	no crack,no leakage
10	Joint seal test	no crack,no leakage
11	health performance	conform GB/T17219-1998
12	content of vinyl chloride monomer	≤1.0mg/kg

PVC-M pipe for water supply

Click to view

Basic Information:

PVC-M pipe is a new type of pipe with high strength and toughness,which is mainly made of PVC resin powder,with impact modifier added and extruded through advanced processing technology.Product implementation industry standard CJ/T272-2008,excellent performance.The pipeline is mature and widely used abroad.

The addition of impact modifier not only maintains the high strength of PVC-U pipeline,but also increases the ductility of materials,thus making products have good toughness and enhancing the safety and

environmental adaptability of pipelines.The product has the advantages of simple connection of PVC-U pipe, flatness and high impact resistance of PE pipe.It is a pipe with excellent comprehensive performance.

Product Feature:

1,light weight,easy to transport and installation.

Due to the high impact resistance modification of raw materials,the pvc-m pipe wall is thicker and lighter under the same pressure.

2.Good rigidity and toughness.

Compared with ordinary pvc-u pipe of the same specification,the impact resistance is improved significantly, and it can resist point load and uneven settlement of foundation more effectively.

3,health and environmental protection,no pollution,ensure the water quality,no scaling,no breeding bacteria.

4.Simple and reliable connection

5.Lower cost of pipeline operation and maintenance.

6,corrosion resistance,long service life.

Chemical corrosion resistance,can be used in any ordinary pvc-u pipe applications.Under normal service conditions,the service life is more than 50 years.

Product Application:

The products are widely used in municipal water supply and drainage,civil water supply and drainage, industrial water supply,industrial drainage,irrigation and vegetation watering.

Specification:

Outside diameter (mm)	Wallthickness(mm)
	SDR51	SDR41	SDR33	SDR26	SDR21	SDR17
	PN0.63	PN0.8	PN1.0	PN1.25	PN1.6	PN2.0
20					2	2
25					2	2
32					2	2
40					2	2.4
50				2	2.4	3
63			2	2.5	3	3.8
75		2	2.3	2.9	3.6	4.5
90	2	2.2	2.8	3.5	4.3	5.4
110	2.2	2.7	3.4	4.2	5.3	6.6
125	2.5	3.1	3.9	4.8	6	7.4
140	2.8	3.5	4.8	5.4	6.7	8.3
160	3.2	4	4.9	6.2	7.7	9.5
180	3.6	4.4	5.5	6.9	8.6	10.7
200	3.9	4.9	6.2	7.7	9.6	11.9
225	4.4	5.5	6.9	8.6	10.8	13.4
250	4.9	6.2	7.7	9.6	11.9	14.8
280	5.5	6.9	8.6	10.7	13.4	16.6
315	6.2	7.7	9.7	12.1	15	18.7
355	7	8.7	10.9	13.6	16.9	21.1
400	7.9	9.8	12.3	15.3	19.1	23.7
450	8.8	11	13.8	17.2	21.5
500	9.8	12.3	15.3	19.1	23.9
560	11	13.7	17.2	21.4	26.7
630	12.3	15.4	19.3	24.1

Performance comparison

item	PVC-M pipe	PVC-U pipe	HDPE pipe
pipe thickness	Very thin	thin	thick
bending property	Allow some degree of change shape	Hard,not bent	Flexible well
glancing flatness	Good glancing flatness flatness, not easy to deform	Good glancing flatness flatness, not easy to deform	Low degree of steel, small pipe diameter poor flatness,bending easy to change shape
impact-resistan ce strength	Restitution within a period of timeafter receiving external impact	Poor toughness, vulnerable to external impact brittle crack	Good toughness,by the external impact can be quickly restored to the original state
Install connection	Adhesive bond or elastic seal ring connection,simple operation, short construction period	Adhesive bond or elastic seal ring connection, simple operation, short construction period	Hot melt or electro -melt connection. Relatively high cost and long construction time
price	lower	low	high

Performance indicators

Item		Index
density,kg/m²		1350-1460
vicat softening temperature,℃		≥80℃
longitudinal reversion,%		≤5%
dichloromethane impregnating experiments,15℃15min		surface change is not less than4N
drop hammer impact test(0℃)TIR,%		≤5%
hydraulic test	dn<63mm 20℃ 36Mpa 1h
	dn<63mm 20℃38Mpa 1h	No crack,no leakage
	60℃ 10Mpa 1000h
system applicability experiment	connection tightness test	No crack,no leakage
	external pressure test	No crack,no leakage
	deflection Angle test	No crack,no leakage

HDPE pipe for water supply

Click to view

Product introduce:

HDPE pipe supply China’s municipal pipe market,plastic pipe is steadily developing,PE pipe,pp-r pipe, UPVC pipe have a place,among which PE pipe strong development momentum is the most eye-catching.PE pipe is widely used in many fields.Among them,water supply pipe and gas pipe are its two largest application markets.

PE pipe for water supply is traditional steel pipe,UPVC drinking water pipe replacement product.

Product Feature:

1.high strength,resistance to environmental stress cracking performance,good creep resistance.

2.toughness,flexibility,and uneven on the basis of the ability to adapt to dislocation,can withstand earthquakes and typhoons and other harsh environments.

3.has good weather resistance (including anti-ultraviolet properties)and long-term thermal stability.

4.corrosion-resistant,do not need to do anti-corrosion treatment,long service life.

5.the inner wall is smooth,the water current resistance is small,the circulation ability is big,saves the construction cost.

6.wear resistance.

7.low-temperature impact resistance,and can be-20-40℃ temperature range of safe use,winter construction is not affected.

8.Fused (or hot melt)connection is convenient and reliable,construction and maintenance of convenience (during which can not stop the water).

9.fully suitable for traditional excavation construction methods and pipe jacking,directional drilling,liner,pipe cracking,submerged underwater and other new trenchless technology.

10.polyethylene raw materials contain only carbon,hydrogen two elements,harmless to the human body.

11.The use of advanced nano-antibacterial technology,effectively inhibit the growth of algae,bacteria and fungi,is green,healthy,environmentally friendly drinking water pipeline.

Product Application:

1.urban water network system.

2.urban and rural drinking water pipeline.

3.liquid transport pipeline for chemical,chemical fiber,food,forestry,printing and dyeing,pharmaceutical,light industry,paper making,metallurgy and other industries.

4.agricultural irrigation pipes.

5.post and telecommunication lines,power wire protection casing.

6.mine mortar pipeline.

Pipe connection:

1.electric hot melt connection:use special electric hot melt welding machine to connect straight pipe with straight pipe,straight pipe with pipe fitting.Generally used for 160mm pipes.

2.Hot melt butt connection:use a special butt welding pipe connected,generally used for more than 160mm pipe.

3.steel-plastic connection:flange,screw thread and other methods can be used for connection.

4.appropriate tools should also be prepared to facilitate construction and ensure construction quality

HDPE water pipe advantages

1.High strength,excellent environmental stress cracking resistance,good creep resistance;

2.Good toughness and flexibility,strong adaptability to uneven foundation and dislocation,and able to resist the harsh environment such as earthquake and typhoon;

3.Good weather resistance (including uv resistance)and long-term thermal stability;

4.Corrosion resistance,no need for corrosion treatment,long service life;

5.Smooth inner wall,small flow resistance,large circulation capacity,saving construction cost;

6.Good wear resistance and wear resistance;

7.Good low-temperature impact resistance,safe to use in the temperature range of-20~40℃,not affected by winter construction;

HDPE 100 water pipe specificaiton:

Outside Diameter (mm)	Wall Thickness(mm)
Outside Diameter (mm)	SDR26(PN0.6)	SDR21(PNO.8)	SDR17(PN1.0)	SDR13.6(PN1.25)	SDR11(PN1.6)
20					1.9
25				1.9	2.3
32				2.4	3
40			2.4	2.9	3.7
50			3	3.7	4.6
63		3	3.8	4.7	5.8
75		3.6	4.5	5.6	6.8
90		4.3	5.4	6.7	8.2
110	4.2	5.3	6.6	8.1	10
125	4.8	6	7.4	9.2	11.4
160	6.2	7.7	9.5	11.8	14.6
200	7.7	9.6	11.9	14.7	18.2
225	8.6	10.8	13.4	16.6	20.5
250	9.6	11.9	14.8	18.4	22.7
315	12.1	15	18.7	23.2	28.6
355	13.6	16.9	21.1	26.1	32.2
400	15.3	19.1	23.7	29.4	36.3
450	17.2	21.5	26.7	33.1	40.9
500	19.1	23.9	29.7	36.8	45.4
560	21.4	26.7	33.2	41.2	50.8
630	24.1	30	37.4	46.3	57.2
710	27.2	33.9	42.1	52.2
800	30.6	38.1	47.4	58.8
900	34.4	42.9	53.3
1000	38.2	47.7	59.3

HDPE 100 pipe performance:

item		performance requirements
20℃ Hydrostatic strength(hoop stress12.4MPa,100h)		No cracking,no leakage
80℃ Hydrostatic strength(hoop stress 5.5MPa,165h)		No cracking,no leakage
80℃ Hydrostatic strength(hoop stress 5.0MPa,1000h)		No cracking,no leakage
Elongation at break,%		≥350
Longitudinal shrinkage(110℃),%		≤3
Oxidation induction time(200℃),min		≥20
Weather resistance 1) (pipe accumulation Aging≥3.5GJ/m2 was accepted After the energy)	80℃Hydrostatic strength(hoop stress 4.6MPa,165h)
		No cracking,no leakage

	Elongation at break,%	≥350

PP-R pipe for cold and hot water supply

Click to view

Basic Information:

PP-R environmental protection hot and cold water pipe series products are produced in accordance with the high standards and strict requirements of ISO9001 quality system,and the products fully comply with GB/T18742.1,GB/T18742.2,GB/T18742.3,GB/T17219-1998 health standards and the relevant health and safety evaluation regulations of the ministry of health of the People’s Republic of China.PP-R drinking water pipe is a new kind of product is generally used to developed countries in the world today,it is in the hot and cold water transportation engineering using homogeneous welding technology,its comprehensive performance is much better than other similar products and economic indicators,especially its excellent health performance, can achieve the whole process from production to use waste recycling high health,environmental protection requirements.

Outside diameter (mm)	Wall Thickness(mm)
	PPR cold water pipe		PPR cold and hot water pipe
	1.25mpa	1.6mpa	2.0mpa	2.5mpa
16	一	2	2.2	2.7
20	2	2.3	2.8	3.4
25	2.3	2.8	3.5	4.2
32	2.9	3.6	4.4	5.4
40	3.7	4.5	5.5	6.7
50	4.6	5.6	6.9	8.3
63	5.8	7.1	8.6	10.5
75	6.8	8.4	10.3	12.5
90	8.2	10.1	12.3	15
110	10	12.3	15.1	18.3
160	14.6	17.9	21.9	26.6

Product Feature:

1.Health,non-toxic,no rust,never scale;

2.High temperature resistant(top conveying water temperature of 95℃),high pressure resistance (resistance to pressure test strength up to more than 5 mpa);

3.Hot-melt connection is adopted to integrate the homogeneous melting of pipes and fittings,which is safe and reliable and willnever leak;

4.Low thermal conductivity,0.21w/mk of pp-r pipe (only 1/200th of metal pipe),good thermal insulation performance;

5.Light weight,easy handling,low construction intensity;

6.Smooth inner wall,small pressure loss and fast water flow;

7.The pipe conveying noise is low,and the noise decreases by 40%(compared with galvanized pipe);

8.The product is soft in color,beautiful in appearance,and can be installed in both light and dark;

9.Good chemical corrosion resistance;

10.Easy and quick installation,low construction cost;

11.Long service life,which can be more than 50 years under normal conditions.

Product Application:

1.The cold and hot water system of the building,including the central heating system;

2.The heating system in the building,including the main pipe of the floor and wall panel radiant heating system;

3.Potable pure water supply system and food industry pipeline system;

4.Central (centralized)air-conditioning system and traditional heating system;

5.Irrigation system for public places,gardens and greenhouses;

6.Industrial piping system for conveying or discharging chemical media.

HDPE double-wall bellows

Click to view

Product introduce:

HDPE double wallcorrugated pipe is a new type of pipe with annular outer wall and smooth inner wall.It was first developed in Germany in the early 1980s.After more than ten years of development and improvement,has developed from a single variety to a complete product series.At present in the production process and the use of technology has been very mature.Because of its excellent performance and relative economic cost,it has been widely used in developed countries such as Europe and America.In China,HDPE double wall bellows are in the phase of rising trend of promotion and application,all the technical indicators are up to the use standard.The inner walls of double-wall corrugated tubes are usually blue and black,and some brands use yellow.

Product Feature:

1.Unique structure,high strength,compression and impact resistance.

2,smooth inner wall,friction,large flow.

3,convenient connection,joint sealing,no leakage.

4.Light weight,quick construction and low cost.

5,buried life of more than 50 years.

6.Polyethylene is a hydrocarbon polymer with non-polar molecules and is resistant to acid and alkali corrosion.

7.The raw material is green and environment-friendly material,non-toxic,non-corrosive,non-scale,and recyclable.,suitable temperature range wide,8-10℃environment pipeline rupture,the medium of the highest temperature of 40℃ .

8.The comprehensive engineering cost is basicallythe same as that of concrete,and the operation cost is low.

9.good soil conditions do not need a foundation.

Product Application:

1.Drainage and ventilation pipes of mines and buildings;

2.Municipal engineering,underground drainage and sewage pipes of residential areas;

3.Irigation,water transmission and drainage;

4.Sewage treatment plant and waste disposal plant drainage pipes;

5.Chemical ventilation pipes and conveying pipes used for fluid in chemical industry and mine;

6.Overall machining of pipeline inspection Wells;

7.Embedded pipeline of expressway;

8.High voltage cable,post and telecommunication cable protection sleeve,etc

Performance indicators:

Item		performance index
ring-stiffness	SN4	≥4KN/M²
	SN8	≥8KN/M²
impact strength		TIR≤10%
Flexible		The sample is smooth,no reverse bending, no cracking,and no separation of the two walls
oven test		No bubbles,no layering,no cracking
creep rate		≤4

Specification:

Nominal diameter DN/ID(mm)	Minimum mean inner diameter (mm)	Minimum laminated wallthickness (mm)	Minimum inner wall thickness (mm)	bonding length (mm)
200	195	1.5	1.1	54
300	294	2	1.7	64
400	392	2.5	2.3	74
500	490	3	3	85
600	588	3.5	3.5	96
800	785	4.5	4.5	118

HDPE steel belt reinforced spiral bellows

Click to view

Product introduce:

HDPE steel belt reinforced spiral bellows are made of HDPE as the matrix,and the steel belt coated with adhesive resin is formed into waveform as the main supporting structure,and the double wall spiral bellows are wound and compounded with polyethylene material as a whole.Steel belt reinforced polyethylene(PE)spiral corrugated pipe of high rigidity,high strength steel and plastic,such as corrosion resistance,wear resistance and flexibility is better,not only can make the pipe to SN8,SN12.5,SN16 three ring stiffness,and solve the problem of the corrosion of steel,makes up for the large diameter of the plastic underground drainpipe normally only reached the ring stiffness SN8 weakness.

Material	Polyethylene,steel belt
Working Temperature	-30°C-+100°C,short time to+120°C
Structure	internal and external are wavy
Color	Black,other colors can be customized
Features	Good flexibility,twist resistance,bending resistance,abrasion acid,oil,coolant,
Features	etc.Shiny surfact can withstand heavy loads
Carring Capacity	can withstand the weight of foot,no broken,deformed,can be quickly restored
Carring Capacity	and without any damage itself.
Application Area	Applicable to machine tools,power equipment,food machinery,automative
Application Area	instrument,motor industry etc.
Usage	put wires and cables into the flexible pipe and match with quick connector RQG
Usage	seriers

Performance index:

ltem	index
Ring stifness(kN/m2)	SN8	≥8
	SN10	≥10
	SN12.5	≥12.5
	SN16	≥16
Impact performance	TIR≤10%
Ring flexibility	No cracks,no separation on both walls
Oven test	No delamination,no cracking
Tensile strength	≥1460N

Product Application:

1.Municipal engineering rainwater and sewage discharge

2.Industrial wastewater discharge and community drainage project

3.Salt transport and fishery water transport

4.Agriculture,forestry,drainage and irigation

5.Water conservancy projects

6.Ventilation system

7.Cable and wire sheath

Product Feature:

1.The pipeline material with strong corrosion resistance is PE,which will not be corroded by acid,alkali and oil.

2.The pipeline with strong resistance to external forces has the shape of spiral structure and flexibility.When it is subjected to external impact,it has strong resilience.

3.strong aging resistance pipeline substrate characteristics at 20 degrees can be effectively used for more than50 years,has a strong aging resistance.

4.strong cold resistance in the environment of minus 60 degrees,pipe will not be frozen broken water.

5.The light weight is only 1/8 of the concrete pipe of the same specification and 2/3 of the traditional wound plastic structural pipe,which is convenient for transportation and construction and does not require large construction equipment,thus reducing the installation cost.

6.Low construction cost,light weight,convenient connection,and low requirements for excavation projects.It can save project time and costs in urban drainage project construction.

7.easy to connect the connection of various ways,simple,reliable.The site can be easily constructed.

8.superior abrasion resistance pipeline friction coefficient low,small resistance,transmission medium,drainage, sewage speed.

9.good environmental performance Pe itself is non-toxic renewable material,environmental health.

10.High ring stiffness can reach SN12.5 and SN16

PVC-U drainage pipe

Click to view

Product introduce:

PVC-U drainage pipe drain is sanitary grade polyvinyl chloride(PVC)resin as the main raw material,adding an appropriate amount of stabilizer,lubricant,filler,toner and other plastic extruder extrusion molding and injection molding machine,through cooling,curing,shaping,inspection,packaging and other procedures to complete the production of pipe,pipe fittings

Specification:

outside diamter (mm)	mean outside diameter deviation (mm)	Wall thickness and deviation (mm)	Length(m)
40	0.3	2.0+0.4	4or6
50	0.3	2.0+0.4	4or6
75	0.3	2.3+0.4	4or6
110	0.4	3.2+0.6	4or6
160	0.5	4.0+0.6	4or6
200	0.6	4.9+0.6	4or6
250	0.6	6.2+0.6	4or6
315	0.7	7.8+0.6	4or6

Performance index:

ltem	Index
density(kg/m²)	1350-1550
Vicat Softening Temperature	≥79℃
(VST)	≤5%
Longitudinal shrinkage rate	Surface change
Dichloromethane immersion test	is not worse than 4L
tensile yield strength	≥40Mpa
dart drop impact test(TIR)	≤10%

Product Feature:

1.Light weight,convenient handling and handling:

PVC pipe material is very light,handling,construction is convenient,can save labor.

2.Excellent chemical resistance

PVC pipe has excellent acid,alkali and corrosion resistance,suitable for chemical industry.

3.Low fluid resistance

The wall surface of PVC pipe is smooth and the resistance to fluid is small.Its roughness coefficient is only 0.009,lower than that of other pipes.At the same flow rate,the pipe diameter can be reduced.

4.High mechanical strength

PVC pipe has good water pressure resistance,external pressure resistance,impact resistance,etc.

5.Good electrical insulation

PVC pipe is rich in superior electrical insulation,suitable for wire,cable conduit,and building wire piping.

6.It does not affect water quality

PVC pipe proved by dissolution test does not affect the water quality,for the current tap water with the best pipe.

7.Simple construction

The connection between PVC pipes is quick and easy,so the construction cost is low

Product Application:

The products are widely used in municipal water supply and drainage,civil water supply and drainage, industrial water supply and drainage,irrigation and vegetation watering,etc.

PVC-U double - walled hollow spiral silencing pipe

Click to view

Product introduce:

PVC-U double-walled hollow spiral silencing pipe is PVC-U as the main raw material,add the necessary additives,the use of advanced production equipment and technology,the extrusion forming of tube wall double layer structure and several triangular spiral rib,the noise of the drainage of hollow wall pipe.The protruding triangular spiral rib in the tube wall has the same performance as the real spiral tube.Because the tube wall adopts a double-layer structure with a hollow layer in the middle,it can effectively isolate the noise generated by the water flow in the tube from the external transmission,and the noise elimination effect is more obvious

Specification:

loutside diameter (De mm)	Thickness/mm	number of Screw arris	number of blank
50
75	5	6	22
110	6	6	24
160	7	6	32

Performance index:

ltem	Performance index
vicat softening temperature	≥79℃
tensile yield strength	≥28Mpa
ring-stiffness	≥8.0KN/m²
flattening test	No cracking
dart drop impact test	>90%
longitudinal reversion	<9%

Product Feature:

1.Six streamlined spiral internal ribs enable water to swirl down against the inner wall of the pipe,greatly reducing the noise of the pipe system.

2.The outer wall of the pipe is a hollow and porous structure,in which the empty layer can further block the noise generated during drainage to enhance the sound elimination effect of the pipe.

3.Under the guidance of the spiral internal bar of the pipe,the water flow falls spirally along the wall of the pipe, and the unblocked air column is formed in the center of the drainage riser,which has a strong ventilation ability.No additional exhaust pipe is needed to reduce the project cost.

4.The spiral muffler pipe fitting with unique design makes the water flow into the riser along the tangential

direction to reduce the collision of water flow and thus reduce the noise.The pipe fitting can also play the role of expansion joint to compensate the change of pipe length caused by thermal expansion and cold contraction.

5.The hollow structure of the outer wall of the pipe can play a good insulation effect and prevent the condensation phenomenon on the outer wall of the pipe.

Product Application:

It is suitable for the indoor muffler drainage system of high class office,conference hall,hotel,guesthouse, apartment,villa and high grade residential area.

PVC-U power cable protection pipe

Click to view

Product Introduction

PVC-U power cable protection pipe is made of PVC resin as the main raw material, with various stabilizers added. It is a rigid PVC pipe available in various specifications, featuring corrosion resistance, high temperature resistance, light weight, low project cost, long service life, etc.

Product Features

Material Characteristics

PVC-U power pipe is mainly made of PVC-U resin, which has excellent heat resistance and insulation performance. PVC-U products are currently recognized as green environmental protection products.

Heat Resistance

The heat-resistant temperature of PVC-U power tube is 15℃ higher than that of ordinary UPVC double-wall corrugated pipe.

Insulation Performance

PVC-U power pipes can withstand high voltage above 30,000 volts.

Compression Resistance

PVC-U power pipe is modified by material, and the ring stiffness of the product reaches 10kpa.

High Impact Resistance

Good Flame Retardant Performance

Installation Performance

PVC-U power pipe has light weight, high strength, and simple construction and laying methods.

Long Service Life

PVC-U power pipe material is corrosion-resistant and anti-aging, with a service life of more than 50 years.

Performance index:

ltem	technical index
appearance	pipe wallno bubble,no crack decomposition
appearance	color line,no impurities
color	Colour and lustre is uniform
Drop hammer impact test(TIR20℃)	pass 9/10
flattening test	no crack
ring-stiffness(KN/m²)	≥6.3

Application:

Telecom,cable sleeve;Highway communication pipeline defense communication,railway communication pipeline street lamp and various communication light (electrical)bushing

PVC-C power cable protection pipe

Click to view

Product Introduction

The PVC-C sleeve for buried high voltage power cables is mainly made of polyvinyl chloride (PVC-C) resin, extruded with the addition of necessary processing aids. This power sheath pipe has improved and specific special physical properties, and is mainly applicable for power cable laying, playing a guiding and protective role.

It can maintain its shape without deformation in an underground environment with a temperature above 93℃. Moreover, it can withstand the high temperature generated by the overload short circuit of high voltage power cables exceeding 30,000 volts. It features good flexibility, high temperature resistance, resistance to breakage and aging, long service life, no radiation pollution, light weight, etc.

Performance index:

No.	ltem	Performance indicators
1	executive standard	QB/T 2479-2000
2	appearance	The inner and outer walls of the products should be smooth and even,without bubbles, cracks and obvious marks,depressions and discoloration lines.The color is orange red.
3	vicat softening temperature ℃	≥93
4	Volume resistivity(Ω ·cm)	≥1.0*10^13
5	Hot compression force of ring plate (KN)(EN≤7.0mm)	≥0.70
6	Hot compression force of ring plate (KN)(EN≥8.5mm)	≥1.26
7	flame retardation	grade FV-0
8	coefficient of friction	≤0.35
9	tortuosity(%)	≤1.0
10	drop hammer impact test	pass 9/10
11	density(kg/m3)	1350~1500
12	oxygen index%	≥40
13	through overload test	deformation of pipe is less than 2.5%
14	longitudinal shrinkage rate≤	5%

Application

Widely used in urban power grid construction and transformation.

Urban reconstruction projects.

Civil aviation airport construction.

Campus engineering.

Community project construction.

Traffic, road and bridge construction, as well as urban streetlight cable laying, where it plays a guiding and protective role.

HDPE power cable protection pipe

Click to view

Product Introduction

HDPE power cable protection pipe is a high-tech product. It is mainly made of high-density polyethylene resin, with appropriate additives added and processed by extrusion. This product has performance characteristics such as corrosion resistance, aging resistance, impact resistance, high mechanical strength, long service life, and excellent electrical insulation performance. It can be widely used in fields such as buried high voltage cable protection and street lamp cable protection sleeves.

Product Features

Excellent Physical Properties: Produced with high-quality polyethylene, it has good rigidity, strength, and flexibility, which is beneficial for pipe installation.

Corrosion Resistance and Long Service Life: In coastal areas with a high water table and high soil moisture, metal or other pipelines must be anti-corrosive and generally only last for 30 years. However, PE pipes can withstand various chemical media and are not affected by soil corrosion.

Good Toughness and Deflection: PE pipe is a kind of high-toughness pipe with a breaking elongation of more than 500%. It has a strong ability to adapt to uneven ground settlement and foundation dislocation, good shock resistance, and small-diameter pipes can be bent arbitrarily.

Smooth Tube Wall: With a small friction coefficient, it is easy to install cables, and the construction efficiency is high.

Good Electrical Insulation Performance: It has a long service life (the buried pipe life is more than 50 years), is durable, and ensures safe and reliable line operation.

Light Weight: It is convenient for maintenance, transportation, and operation.

Coil Pipe Form for Small-diameter Pipes: Small-diameter pipes can be in the form of coil pipes, with long pipe sections, few joints, and easy installation.

Color-coded: Pipes can be made into various colors for easy distinction.

Excellent Low-temperature Impact Resistance: The low-temperature embrittlement temperature of PE is very low, and it can be used safely within the temperature range of -20℃ to 40℃. During winter construction, due to the good impact resistance of the material, the pipes will not become brittle.

Good Abrasion Resistance: Compared with other metal pipes, the abrasion resistance of PE pipes is four times that of metal pipes.

Diverse Construction Methods: In addition to the traditional excavation method, PE pipes can also be constructed using a variety of new trenchless technologies, such as pipe jacking, lining, pipe cracking, etc., making it the only choice for sites where excavation is not allowed.

Application

It is widely used in urban road construction, residential development, landscaping, enterprise construction, and other places, serving as cable threading casings for power, street lamps, lawn lights, garden lights, residential intelligence, cable television, communications, intelligent transportation, etc.

MPP power cable protection pipe

Click to view

Product Introduction

MPP power cable protection pipe is a type of pipe with high temperature resistance and external pressure resistance. It is manufactured using modified polypropylene as the main raw material. This pipe is categorized into two types: the excavation type and the trenchless type. The MPP trenchless pipe is also referred to as MPP jacking or pulling pipe. It is suitable for high voltage transmission lines and cable discharge pipes with a voltage of 10KV and above.

Commonly used specifications:

No.	Nominal diameter (mm)	wall thickness (mm)	No.	Nominal diameter (mm)	wall thickness (mm)
1	110	5	14	180	8
2	110	6	15	180	10
3	110	8	16	180	12
4	125	8	17	200	10
5	125	9	18	200	12
6	125	10	19	200	13
7	160	5	20	225	12
8	160	8	21	225	13
9	160	9	22	225	15
10	160	10	23	250	17
11	160	12	24	280	18
12	166	8	25	315	25
13	170	10

Performance indicators:

Item	Index	Test method
density g/cm3	0.91-0.95	GB/033-86
Sliding friction series	<0.35	GB/T3960-89
tensile strength(23±2)℃	≥22.0	GB/T1040-92
(70±2)℃ Mpa	≥16.5	GB/T1040-92
hot melt joint tensile strength Mpa	≥21.6	GB/T3960-92
flexural strength (23±2)℃ Mpa	≥34.0	GB/T9341-2000
flexural modulus Mpa	900-1200	GB/T9341-2000
flattering test (D/2,-5℃)	no cracking	GB9647-88
vicat softening temperature (10N.50℃/h)℃	≥120	GB/T1633-2000
drop-hammer impact test (-5℃)D>160mm 10kg*2m	9/10 no cracking	GB/T6112-1985
D≤160mm 6kg*2m
D≤125mm 5kg*2m

Product Features

MPP pipe has excellent electrical insulation.

MPP pipe has high thermal deformation temperature and low temperature impact performance.

The tensile and compressive properties of MPP tube are higher than HDPE.

MPP pipe is light, has a smooth surface, offers small friction force, and can be hot welded and butt – jointed.

MPP pipe can be used for a long time at a temperature range of 5～70℃.

Product Application

It can be widely used in municipal, telecommunications, electricity, gas, water, heat and other pipeline projects.

PVC-U electrical conduit pipe

Click to view

Product Introduction

PVC-U architectural insulation electrical sleeve is a pipe used to protect the wiring of wires or cables during electrical installation construction. It enables the penetration and replacement of wires or cables. PVC-U insulated electrical sleeve pipes and fittings are made from PVC resin, with special additives, through extrusion and injection molding processes. They are mainly used as sleeves for electrical and communication cables.

Specification:

Outside diameter	light-type	middle-type	heavy-type
(mm)	inner diameter(mm)	inner diameter(mm)	inner diameter(mm)
16	13.7	13	12.2
20	17.4	16.9	15.8
25	22.1	21.4	20.6
32	28.6	27.8	26.6
40	35.8	35.4	34.4
Note:Other specifications can be negotiated

performance index:

lItem	Index
density(gcm²)	0.91-0.96
coefficient of sliding friction	<0.35
Veka softening temperature℃	≥80
tensile strength(Mpa)	≥24.0
hot melt joint tensile strength(Mpa)	≥21.6
flexural strength(Mpa)	≥37.0
flexural modulus(Mpa)	900-1500
flattering test(1/2)	no cracking
dart drop impact test	9/10 no cracking
Heat compression force in exchange(KN)	≥1.8

Product Features

The inner and outer walls of the pipe fittings are smooth and the friction coefficient is small.

High compression resistance.

Good impact resistance and heat resistance.

Moisture resistance, acid and alkali resistance.

Flame retardant.

Insulation.

Resistance to insects.

Convenient construction.

Product Application

Mainly used for building or structure indoor threading, wall threading, underground buried lines and other power, communication lines.

PVC-U low pressure irrigation pipe

Click to view

Product Introduction

PVC-U low pressure irrigation pipe is produced by extrusion molding, with PVC-U resin as the main raw material and necessary additives added. The PVC-U low-pressure irrigation pipes produced by our factory fully comply with the GB/T13664 – 2006 standards. In China, PVC-U low-pressure irrigation pipe is a product vigorously promoted by the state and is widely used in agricultural irrigation.

Product Features

Good Mechanical Performance: PVC-U agricultural irrigation pipe has high rigidity and strong resistance to external forces. When used for buried water transmission, it is not easily damaged by external forces.

Smooth Inner Wall: The inner wall of the PVC-U agricultural irrigation pipe is smooth, resulting in low fluid resistance and no rust formation. It has lenient water quality requirements, with no accumulation inside and is not prone to blockage.

Small Linear Expansion Coefficient: The linear expansion coefficient of the PVC-U pipe is small. Even when the environmental temperature changes significantly, the pipe will not undergo obvious deformation that could affect the irrigation effect.

Excellent Anti-aging Performance: Antioxidants and light stabilizers are added to the formula of the PVC-U agricultural irrigation pipe, endowing it with excellent anti-aging properties. This ensures its durability whether under long-term illumination or buried underground.

Complete Set of Pipes and Fittings: The pipes and fittings have stable sizes, avoiding installation difficulties or water seepage caused by large tolerance in fittings.

Stable and Sanitary Performance: The pipe has stable performance and good sanitary properties. It does not affect water quality, and is non-toxic and pollution-free, posing no harm to crops.

Simple Connection Modes: The connection between PVC-U pipes and fittings for irrigation is simple, mainly including bonding and thread bonding, with bonding being the commonly used method. When the adhesion is properly done, the connection of the PVC-U pipe is stronger than the pipe body itself.

Light Weight: It is light in weight, making transportation, installation, and use convenient.

Specification:

nominal diameter (mm)	outside diameter (mm)	tolerance(mm)
50	50	±0.3
75	75	±0.4
100	100	±0.4
125	125	±0.5
160	160	±0.5
200	200	±0.6
250	250	±0.8
315	315	±0.9
Note:wall thickness can be customized

Performance index:

Item	Index
density(kg/m²)	1400-1600
longitudinal shrinkage	≤5%
tensile yield pressure	≥40MPa
hydraulic test	No crack,no leakage
dart drop impact test	No crack
stiffness(5%)	≥0.04MPa
flattering test(The pressure to 50%)	No crack

Application:

Used in agricultural irrigation widely

PE low pressure irrigation pipe

Click to view

Product Introduction

PE low-pressure irrigation pipe is mainly made of polyethylene resin. In accordance with the basic parameters and technical conditions of plastic pipes and fittings for irrigation specified in GB/T23241 – 2009, necessary additives are used in the processing. It is the most ideal alternative to traditional water-saving irrigation pipes and has been widely applied in low-pressure irrigation projects.

Product Features

Good abrasion resistance, non-toxic, UV resistant and flexible.

With anti-aging agent added, it has a long service life and excellent corrosion resistance.

It can not only replace the wool canal to reduce the loss of water transmission in the field, but also strictly control and regulate the irrigation water consumption in the field.

Integrates the field water delivery and field irrigation control system.

Low energy consumption, low input, low irrigation cost, high standard water saving and high efficiency.

Combines pipeline water transmission with field water-saving technology.

Performance index:

Item	Index
elongation at break,%	≥350
longitudinal reversion, (110℃),%	≤3
resistant to environmental stress cracking	Not more than 10% the number of unqualified bending
static oxidation induction time (200℃)min	≥20
hydrostatic test(20℃)	No cracking,no leakage
The annular stress of PE63 grade pipe is 8.0Mpa(100h)and that of PE80 grade pipe is 9.0Mpa(100h)

Application:

1.Agricultural irrigation

2.Landscape irrigation project

HDPE gas pipe

Click to view

Product Introduction

HDPE gas pipe is made of gas-fired polyethylene, boasting numerous excellent properties and is applied in the field of gas transportation. It completely solves the corrosion and joint leakage problems of steel and cast iron pipes, ensuring the safe operation of the gas pipeline network system. The HDPE material used for gas pipes is inert, resistant to the erosion of various chemical media. With a low wall friction coefficient, it has small flow resistance and strong transmission capacity. It uses electrothermal fusion connection, and the interface strength is higher than that of the pipe body. HDPE, known for its high toughness, typically has an elongation at break of over 500%. HDPE gas pipes have good seismic performance, the ability to resist slow crack growth (SCG) and rapid crack propagation (RCP), as well as flexibility and scratch resistance. They have strong adaptability to uneven settlement of the pipe base, high wear resistance, and can be installed using various trenchless methods, which makes construction and installation convenient, reduces the system cost and maintenance cost, and can greatly cut down the engineering cost.

Specification:

HDPE80/ HDPE100 gas pipe series	nominal	normal wall thickness(mm)
	outside diameter(mm)	SDR11	SDR17
	20	3.0	2.3
	25	3.0	2.3
	32	3.0	2.3
	40	3.7	2.3
	50	4.6	2.9
	63	5.8	3.6
	75	6.8	4.3
	90	8.2	5.2
	110	10.0	6.3
	125	11.4	7.1
	160	14.6	9.1
	180	16.4	10.3
	200	18.2	11.4
	225	20.5	12.8
	250	22.7	14.2
	280	25.4	15.9
	315	28.6	17.9
	355	32.2	20.2
	400	36.4	22.8

Performance index:

ltem		Index
Static night pressure (HS),h	20℃(环应力) PE809.0Mpa PE10012.4Mpa	breakdown time≥100
	80℃(环应力) PE804.5Mpa PE1005.4Mpa	breakdown time≥165
	80℃(环应力) PE804.0Mpa PE1005.0Mpa	breakdown time≥1000
elongation at break		≥350%
Black carbon content(mass fraction), (black mix only)		2.0-2.5%
Oxidation induction time,min	200℃	>20
Mass flow rate (MFR),g/10min	195℃,5kg	Changes of MFR before and after processing<20%
longitudinal reversion	110℃	≤3
Gas component,H	80℃,2Mpa(Ring stress)	≥20

Product Features

Reliable connection

Good low-temperature impact resistance: It can be used safely within the temperature range of -60℃ to 60℃. During winter construction, no brittle pipe cracks will occur.

Good stress cracking resistance: HDPE has low notch sensitivity, high shear strength, and excellent scratch resistance, with prominent environmental stress cracking resistance.

Good chemical corrosion resistance

Aging resistance and long service life: It can be stored outdoors or used for 50 years.

Excellent abrasion resistance

Good flexibility

Small flow resistance

Convenient handling

Ability to use a variety of new construction methods, with wider application fields

Application

Natural gas pipeline transportation, gas pipeline transportation, liquefied gas pipeline, methane pipeline and other pipeline transportation.

Connection Methods

Hot melt connection

Electric melt connection

Steel-plastic transition joint connection or flange connection and other methods

Notes

For pipes and fittings with a diameter ≥ 90mm, hot melt connection shall be adopted.

For pipes and fittings with a diameter < 90mm, electric welding shall be adopted.

Steel-plastic transition joints or flanges shall be used to connect pipes with metal and other materials – made pipe accessories.

Get in touch with us

With decades of accumulated experience and professional delivery processes, we provide customers with professionally high-quality plastic pipes.

Contact Us

Name

WhatsApp/Tel

Products

PVC-U pipe for water supply

PVC-M pipe for water supply

HDPE pipe for water supply

PP-R pipe for cold and hot water supply

HDPE double-wall bellows

HDPE steel belt reinforced spiral bellows

PVC-U drainage pipe

PVC-U double - walled hollow spiral silencing pipe

PVC-U power cable protection pipe

PVC-C power cable protection pipe

HDPE power cable protection pipe

MPP power cable protection pipe

PVC-U electrical conduit pipe

PVC-U low pressure irrigation pipe

PE low pressure irrigation pipe

HDPE gas pipe

Get in touch with us

Contact Us

Company

Production

Contact us